products

Contact us


Tel: + 86-0755-23005763
E-mail: sys01@szv-sys.com
Address: 3F-B, Building B6, Junfeng Zhongcheng Zhizao Innovation Park, Fu Hai Street, Bao’an District, Shenzhen, China.
Home  >  D6HL
Loading...
Power Adatper Introduction
Category : D6HL
Hits : 251
Brief : 

Please contact us to learn more details if you have any questions on the power adapter

  • Description
  • Inquiry

Attention

1) Our Smart / ACC Power Supply Cable are designed for motorcycle DVR application
2) Our Smart / ACC Power Supply Cable are only compatible with DVR made by Vsys Tech
3) INPUT: 12V - 24V OUTPUT : DC 5V ; 2A
4) The Power cable's battery voltage display function is an optional function

Connection

1) Smart Power cable must be connected to motorcycle battery directly
2) ACC Power cable must be connected to the ACC wire . Describtion of ACC wire: When you insert the key into the ignition switch and turn it to the left you are turning on the ACC circuit. It will allow you to operate the radio, windows, and other accessories, but it does not turn on the fuel pump and other engine controls. It saves battery power for when you need to operate vehicle components without the engine being on. The ACC wire offers power/electricity only when you insert car key into the ignition switch and turn it to the left.

The Differences of Working Principle

1. ACC Power Cable Must be connected to motorcycle ignition and the DVR will start to work automatically when you insert the key into the ignition switch and turn it to the left and the DVR will be turned off automatically when ignition off and take away your key.
2. Smart Power Cable Must be connected to the motorcycle battery directly and the DVR will start to work automatically as soon as the cable detected voltage change(when ignition on) or a few seconds continuous vibration, no matter your motorcycle engine is on or off; The DVR will keep recording 3 mins after ignition off and then the smart power cable will cut off the power automatically and turned off . The key condition to turn on/off the DVR via smart cable is : Voltage change / continuous vibration

ACC Power Cable - C3 C6 C6L D6HL D7H Version

ACC Power Cable - A series; B series; D series; F series; M series

Attention: Connect the red terminal to battery "+", connect the black terminal to battery "-", connect the yellow wire to ACC port (Key ignition) to control the power supply. Please note that the power cable won't work if disconnected yellow wire.

Smart Power Cable

Product Name:     *
Name:     *
Mobile:     *
Tel:   
Fax:   
E_mail:    *
Address:   
Content:     *
      
Online